Loading Cue points to Wahoo devices help

Carrying your route handy hints with you

I am just in the process of updating this to see if it still works for free on the All Trails site that has taken over the original GPSies site. It might be a bit messy for a while.

Riders in Adventure bikepacking races can benefit from adding waypoints on Garmin devices, but this is harder to do with Wahoo devices like the ELEMNT. RidewithGPS will do this for you very well indeed, and if you are prepared to pay the $80 a year then it’s by far the best option. GPSies.com was a great tool to allow you to do this for free but it has now been taken over: Here is a help guide, and aid memoir for me, in how to do this. (updating for the new owner – All Trails)

To start with there are two methods to create a route, from the main menu from scratch or the option to UPLOAD a route. Initially we will create a simple route and add several Cue points. This allows the user to do some simple tests around their home before a big ride or Endurance event when you will be uploading a set route or one planned on another platform.

Cue points on a created Track

All Trails does not seem to deal in tracks or routes, they call their design area MAPS. Select PLAN then CREATE MAP then select the DRAW ROUTE button.

  • Search for your start location to centre the map
  • Select the routing software type, road. MTB, touring to use
  • Click points on the map for the route to be drawn, map layers can be changed to suit locations and try the overlays like Waymarked cycling.
  • Select save map, did not ask for a title or name
  • On the left hand side you can now add Waypoints as shown below
simple test route

The waypoint appears on the map in the centre as a purple dot; click and drag it to the correct location (very good) and it can be named with a description. Show Title when ticked makes it visible on the map. Here I added three waypoints, they can be edited or re-ordered after creation.

Three waypoints added

Download the route as the type .TCX which then exports the route and the waypoints together.

Cue icons are no longer supported – there is progress for you.

You then have two options to load it to your Wahoo which might be alien to you if you normally just sync your rides from RidewithGPS or Komoot.

  • Load via email. This is my preferred option and also allows you to keep a backup of any route you use in your email system if your device crashes. 1. Email the file to yourself 2. Fire up your Wahoo device and enable the bluetooth on your phone to pair them. 3. Open the email on your phone and select download the TCX file. On my Android phone it asks if you want to import into the Wahoo ELEMNT app, which I OK. 4. The Wahoo app opens and you need to hit SELECT ROUTE highlighted in blue and the file is loaded to the wahoo device.
Wahoo app view
The ride in the Wahoo App
  • Load direct from Your PC. Plug your Wahoo into the PC and power up the device to have it recognised to view its contents. the folder USB_storage-Routes are where USB loaded rides are stored. Delete any you no longer require here, and place your new demo route here. (Note: while you are here its a good idea to clear out the exports folder of old rides to save device space as you have probably synch’d all your rides to save them. Power off the Wahoo before disconnecting it.
  • Power back on the Wahoo and navigate to the route display. Select Sync and the ride will appear in the list. It will show as a USB ride rather than one denoted by Wahoo (loaded from the app) or Komoot/RWGPS/Strava if loaded from there.

Checking out the route for the Cue points

With your Wahoo ELEMENT on the map page > select ROUTE and the new route, if not already selected can be chosen. The CUE points are then shown in the list when Route is pressed again. Does it use Icons? Use the up/down buttons to scroll through the list. Ultimately go out and do the test ride to see the Cue points in action for real.

It would appear the comments box is the main body of text that appears on the Wahoo, so either leave the waypoint name as WP1 etc. in GPSies or change it for reference only while planning.

THIS IS OLD INFORMATION WHICH ONLY WORKED WITH GPSIES The following Ten waypoints had been tested and show up with a symbol in the ELEMENT, most just display a dot so again are only of use on the mapping design stage if used.

  • GENERIC – The one to use for a Dot Icon
  • SUMMIT appears as a mountain Icon
  • VALLEY appears as a valley Icon
  • MOUNTAIN PASS – dot only
  • WATER appears as a water tap icon
  • FOOD appears as a burger Icon
  • DANGER appears as a warning triangle
  • FIRST AID appears as a Cross Icon
  • SPRINT appears as a jersey icon with S on.
  • STRAIGHT appears as an up arrow icon
  • All the 3 LEFT ones appear as same Left icon
  • All the 3 RIGHT ones appear as same Right icon
  • U TURN, RESIDENCE, LODGINGS, PARKING, STATION, ATTENTION, INFORMATION, VIEWPOINT, SIGHTSEEING, BAR-B-Q, CAMPGROUND, GEOCACHE, ZOO, SWIMMING, SERVICE STATION, are all just dot icons.
  • The end of a route has a Flag Icon.

Cue points on a loaded pre-made GPX Track

This could be any compatible track provided for an endurance event or created by yourself in the route tool of your choice and you just wish to add feed-zone points of Cafe stops. Note: If you are used to creating GPX tracks with embedded GPX waypoints these will be imported all ready to use, so you can use GPSies as just a conversion tool from GPX to TCX for the wahoo devices.

From the top menu its PLAN -> CREATE MAP again then use the UPLOAD FILE link and click and drag your ride GPX, TCX or any format supported into the box. It will be shown as a thumbnail. Then hit UPLOAD.

I uploaded a GPX with many waypoints and then selected the Show All Titles option at the bottom of the waypoint list.

Further notes about other capabilities of the GPSies tool some may be still available in All Trails – to be investigated.

  • You can compare routes in GPSies, two or more routes are then shown on the same map in different colours.
  • You can print a pdf of route (waypoints don’t show though)
  • Seperate tracks into groups to easily find them and quick comparisons.
  • There is a handy map over view of all your routes on a European map in either all tracks view or within a group.
  • Multiple route download is available for backups or transferring.
  • Tick the remember route and it appears in the list titled NOTES for quick find option, like a favourites folder.
  • VERY USEFULL: You can use a downloaded route as a template. the editor then opens with this route in the background in purple; You can then try variations by using this as a guide. Great for making similar routes or adding diversion or option routes. Brilliant.

Handy Hints:

  • To delete routes from the Wahoo ELEMNT App – View Routes > Then just swipe the route Left, next Synch it will be removed.
  • Routes from an external source cannot be deleted unless you delete them in Komoot/RWGPS/Strava. If you want to keep an extensive route library in one of these tools then don’t sync the device, and load via email/Wahoo app or USB load. (what a very poor software design)

Please comment on anything that could improve this guide as I have only borrowed a Wahoo device.

2 thoughts on “Loading Cue points to Wahoo devices help

Leave a Reply to Artur Kubiński Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s